Product Information
Product[

Molecular sieve 3A[Product print page]

]Data
If you are interested in this product, you can sendmsg
Product Name: Molecular sieve 3A
Product Type: NK-3A
Product Manufacturers: NKCHEM
Product Documentation: No Related Documents


Brief

Molecular sieve 3A is used for commercial dehydration of unsaturated hydrocarbon streams as cracked gas,acetylene,propylene,and butadiene.


Molecular sieve 3A Details

Molecular sieve 3A

Introduction:

3A molecular sieve is a kind of molecular sieve (alkali metal alumino silicate) whose aperture is 3 Å. Sometimes, it is also called 3A zeolite. It do not adsorb chemicals whose molecular diameters are larger than 3 Å.
According to the industrial application specialties,our products have the characters of higher adsorption speed,stronger crushing and anti-contaminative resistance, more cyclic times and longer work-span. All these advantages have made molecular siev come to be the most essential and necessary desiccant in the fields of the deep drying, refinery polymerization for cracked gasses, ethylene, propylene and any other non-acidic gasses of liquids in petroleum and chemical industrials.

FORMULA:
0.4K2O 0.6Na2O Al2O3 2. OSiO2 4.5H2O

Size:
Available in beads of 1-2mm (10*18mesh),2-3mm(8*12mesh),2.5-5mm(4*8mesh)and as powder,and in pellet

Physical properties:



Application:

It is used for commercial dehydration of unsaturated hydrocarbon streams as cracked gas,acetylene,propylene,and butadiene.It is also used for dehydration of alcohol and solvents.

1) Drying of unsaturated hydrocarbons (e.g. ethylene,propylene,butadien)

2) Cracked Gas Drying
3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required.
4)Drying of highly polar compounds, such as methanol and ethanol
5)Drying of liquid alcohol
6)Static,(non-regenerative) dehydration of insulating glass units,whether air filled or gas-filled.
7)Drying of refrigerants

Regeneration:

**It can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes.
**To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.
**The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Other Products:

Molecular Sieve 4AMolecular Sieve 5AMolecular Seve 13XCarbon Molecular SeveIG Molecular Sieve


Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!

Products
Contact Us
Copyright© 2003-2019  Pingxiang Naike Chemical Industry Equipment Packing Co.,Ltd(耐可)All rights reserved                        赣ICP备12000581号-2
   By theResponsible for the network to promote

赣公网安备 36030202000200号